小12萝裸体无码视频,中国极品少妇XXXXX,欧美日本日韩,在线看亚洲十八禁网站

當前位置: 選型首頁 >  沃康 >  儀器儀表 >系列介紹

沃康  N(H)SMC2   儀器儀表

收錄型號： 0條（帶參數型號： 0 條）

選型指南： 0 條 應用案例： 0 條

安裝調試： 0 條 安裝調試： 0 條

維護維修： 0 條 升級改造： 0 條

收藏

詳細介紹

HSMC2series

Specification

Dimension

■50kPa~3MPa

N(H)SMC2

■2 setting outputs + 4 to 20 mA(with analog output scaling function)
■Quick zero-adjustment, tracking zero adjustment, loop check and moving average are included as standard.
■Safe and reliable construction with break-proof diaphragm
■Safe and reliable construction with no sealed liquid.

Measured mediumAlcohols, milk beverage, seasoning, pure water, chemical or other media.
(These vary according to sensor materials)
Pressure typePositive and negative pressures can be measured.
Pressure rangeCan be specified within the range of 50 kPa to 3 MPa (Calibration:25kPa~3MPa) of rated capacity.
Output type4~20mA(4 wire system) 2-point photo-Mos relay output.
Specify more than 50% of rated capacity as the calibration range.

Specification 1 (Sensor assembly)

Sensor ConnectionISO Ferrule, VARIVENT®, ISO Cap nut, Screw mount, Other special orders
Rated Capacity(R.C.)50, 100, 200, 300, 500, 1000kPa, 3MPa
MaterialSensor: SUS316L / Hastelloy C276 / SUS329J4L
Finish(Sensor Part)Electro-Chemical Buffing
Safe Overload Rating400%R.C. (Rated capacity 3MPa: 150%R.C.)
Destruction Point1000%R.C. (Rated capacity 3MPa: 300%R.C.)

Specification 2 (Amplifier + Sensor assembly)

Non Linearity±0.5%R.C.
Hysteresis±0.5%R.C.
Compensated Temperature Range (Wetted part)-5~150?C
Safe Temperature Range (Wetted part)-5~150?C
Temperature Effect on Zero Balance±0.5%R.C./10?C (Rating: 300, 500, 1000kPa, 3MPa)
±0.7%R.C./10?C (Rating: 50, 100, 200kPa)
Temperature Effect on Load±0.5%R.C./10?C (Rating: 300, 500, 1000kPa, 3MPa)
±0.7%R.C./10?C (Rating: 50, 100, 200kPa)
Ambient Temperature and HumidityTemperature:0~50?C(No freezing), Humidity:0~90%RH(No condensation)
MaterialAluminum die-casting(Case material)
Acrylic(Front)
SUS304(Radiating fin)
IP RatingEquivalent to IP65
MassStandard: Approx. 960g
(A sensor assembly is included. / In the case of ISO ferrule 2S)
AccessoriesOperation manual (1 copy), Test report (1 copy),
1 of connector for a power supply input
1 of connector for a setting output at an analog. (*1)

Model Selection

Model Selection

SelectionCheckModelSpecification
1.Model○HSMC2Intelligent model high temperature type: Temperature range of wetted parts -5~150?C
2.Output○32P4~20mA(4 wire system)(Scaling enabled) + 2 settings photoMOS relay output
(Combination of AC and DC, Load voltage: 240V, Load current: 120mA)
Response:1~500time/sec.   Synchronized with the sampling rate
Hysteresis setting range: 0~999
3.Casing type○ASSensor directly connected on bottom
4.Display/Calibration
(*2)		--Example of calibration range

Pressurization(Example)Rated capacity
At 100.0kPa100.0kPa
(0~100.0)kPa		Specify the values and units of display/calibration ranges.

Negative pressure(Example)Rated capacity
At 100.0kPa-101.3kPa
(0~-101.3)kPa		In case of negative pressure, put the calibration range value in parentheses.

Compound pressureCompound pressure model not available.
5.Rated Capacity(R.C.)
00550kPa

010100kPa

020200kPa

030300kPa

050500kPa

1001000kPa

3003MPa [Display/Calibration: Specify 3.00MPa] (Make to order)
(Withstand pressure:150%R.C.
ISO Cap nut and Screw mount only)
6.Pressure Port
Type/Size
F1ISO Ferrule 1.5S

F2ISO Ferrule 2S

F3ISO Ferrule 2.5S[Make to order]

F4ISO Ferrule 3S[Make to order]

F6ISO Ferrule 4S[Make to order]

V50AVARIVENT® DN50[Make to order]

V65AVARIVENT® DN65[Make to order]

V80AVARIVENT® DN80[Make to order]

V100AVARIVENT® DN100[Make to order]

R1ISO Cap nut 1.5S[Make to order]　Hexagon nut included

R2ISO Cap nut 2S[Make to order]　Hexagon nut included

M0Screw mount type simple substance Dedicated O-ring included (×1)

M1JIS20K50A With flange, Dedicated O-ring included (×1)

M2JIS20K80A With flange, Dedicated O-ring included (×1)
7.Pressure Port Material
BlankSUS316L, Electro-Chemical Buffing(Ry0.7)
⑤Supports all rated capacities.
⑥Supports all pressure port type/size.

HS1Hastelloy C276, Electro-Chemical Buffing(Ry0.7)
⑤Rated capacitor can be selected from among 300, 500 and 1000kPa.
⑥Pressure port type/size can be selected from among F1, F2, F3 and M0.		[Make to order]
Negative pressure and compound pressure are not supported

J4LSUS329J4L, Buffing(#400)
⑤Rated capacitor can be selected from among 300, 500 and 1000kPa.
⑥Pressure port type/size can be selected from among F1, F2, F3 and M0.
8.Limitation
P400%R.C.(3MPa is not selectable)

Blank150％R.C.(3MPa only)
9.Power
4DC24V(±10%) [200mA]

7AC90~240V [6VA]

  • (*2) Basically the calibration range is within the rated capacity, but other requirements are possible, as long as the range is 50% or more than the rating of the sensor used.